A MC-130H Combat Talon II from the 1st Special Operations Squadron flies a training mission during an exercise in Bangladesh June 9, 2006. The 353rd Special Operations Group routinely trains with nations in the Pacific enhance military training and capabilities between the nations. The MC-130H Combat Talon II provides infiltration, exfiltration and resupply of special operations forces and equipment in hostile or denied territory. (Courtesy photo)
The Combat Talon was initially developed between December 1964 and January 1967 by Lockheed Air Services (LAS) at Ontario, California, as the result of a study by Big Safari, the USAF’s program office responsible for modification and sustainment of special mission aircraft. From it two highly classified test bed aircraft (originally serial no. 64-0506 and -0507, but with all numbers “sanitized” from the aircraft), were assigned to Project Thin Slice to develop a low level clandestine penetration aircraft suitable for Special Forces operations in Southeast Asia.
In 1964 Lockheed had modified six C-123B Providers for “unconventional warfare” under Project Duck Hook and then been tasked with adapting the C-130E when the Duck Hook aircraft proved inadequate for the newly launched MACV-SOG. The modifications under Thin Slice and its August 1966 successor Heavy Chain were code named Rivet Yard, and the four C-130Es came to be known as “Yards”. Discrete modification tests were conducted by the 1198th Operational Evaluation and Training Squadron, out of Area II of Norton AFB at San Bernardino, California, 30 miles east of Ontario.
As the Thin Slice aircraft were being developed, SOG requirements resulted in the procurement of 14 C-130Es in 1965 for similar modification. The first aircraft were production C-130Es without specialized equipment that were produced at Lockheed’s facility in Marietta, Georgia. Production airplanes were modified with the installation of the Fulton STARS (then ARS) system, at the rate of three aircraft per month. While awaiting installation of the ARS equipment, the C-130s were ferried to Greenville, South Carolina, for painting by Ling-Temco-Vought Electrosystems with a low-radar reflective paint that added 370 pounds to their weight. The velvet black and green scheme resulted in the aircraft being nicknamed “Blackbirds”. As installation was completed, the Blackbirds were returned to Ontario for installation of the electronics package, code-named Rivet Clamp. The aircraft modified became known as “Clamps” (two of the original 14, 64-0564 and -0565, were diverted to Heavy Chain in August 1966). The aircraft collectively were assigned the designation Combat Talon in 1967. (Source: WikiPedia)
https://documents.theblackvault.com/documents/aviation/ADA421975.pdf
Follow The Black Vault on Social Media:This post was published on February 21, 2015 5:28 pm
The two volumes of the TEMPS (Transportable Electromagnetic Pulse Simulator) Final Report, dated August 1973…
This was originally published on November 7, 2023. The article has been left unchanged, but…
In a newly released batch of internal U.S. Navy emails, obtained by The Black Vault…
The U.S. Army has officially closed out its Cooperative Research and Development Agreement (CRADA) with…
Newly released internal emails from the Department of Defense, obtained through a FOIA request filed…
A newly released set of FBI records obtained by The Black Vault through a May…